How To Fix a Broken Spring on an O’Keefe and Merritt Stove

...ou need to do is pull it out and find a replacement at a hardware store or stove repair shop. 2. My broken spring was on the side of the stove that does not have an access door. To get at this spring I had to remove the side panel of the stove, which is easy to do. The side panel is removed by taking out a set of screws you’ll find along the back of the stove. Once the screws are out, pull the panel off and you should see another access door on th...

Read…

Gardenfork’s DIY Rocket Stove

...https://www.youtube.com/watch?v=S6dGHC_Sqok “East Coast Eric” over at Gardenfork did a variation on our five gallon bucket rocket stove. Eric’s version uses a much easier to find plastic bucket and it seems to work without melting. He’s also promising a sequel to this video featuring a unique egg-in-a-hole grilled cheese sandwich!...

Read…

Make a Pepsi Can Stove

...result is incredibly light. I cut the top off of a 24 ounce Heineken can to make a pot and I used some chicken wire and aluminum foil for a stand. Basically this setup is good for boiling a cup of water, so don’t plan on making any complex balsamic reduction sauces. You can use the stove for coffee and for simple things that need boiling water, i.e. instant soups. Light and compact, this stove is ready for when the shit hits the fan....

Read…

Making It

...ctions for a wide range of projects, from building a 99-cent solar oven to making your own laundry soap to instructions for brewing beer. Making It is the go-to source for post-consumer living activities that are fun, inexpensive and eminently doable. Our goal in this book was to provide really stripped down, simple projects that use only inexpensive, easy to source materials. We also tried to use the same materials and ingredients over and over a...

Read…

Tomato Can Stove

...when the gas and electricity go out. It’s a bit simpler than the Pepsi can stove and doesn’t require fuel other than some sticks or small scraps of wood. The stove works on the same principle as a charcoal chimney starter and it is simple to build. 1. Use a 28 ounce can – I used a Trader Joes tomato can. First, drill a bunch of 1/8 inch holes in the bottom. 2. Next, drill eight 1/4 inch holes about 3/4 of an inch from the top and bottom of the can...

Read…